Journal Articles
|
Arslanyürek, Ş; Dinleyici, MS Nanoparticle manipulation and sorting by phased modulated interference pattern of Gaussian Evanescent Waves Journal Article Optics Communications, 562 , pp. 130543–130543, 2024. BibTeX @article{pop00001_41,
title = {Nanoparticle manipulation and sorting by phased modulated interference pattern of Gaussian Evanescent Waves},
author = {Ş Arslanyürek and MS Dinleyici},
year = {2024},
date = {2024-01-01},
journal = {Optics Communications},
volume = {562},
pages = {130543--130543},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Akin, O; Dinleyici, MS Experimental demonstration of a transient grating controlled all-optical switch Journal Article Engineering Research Express, 5 (1), pp. 15028–15028, 2023. BibTeX @article{pop00001_26,
title = {Experimental demonstration of a transient grating controlled all-optical switch},
author = {O Akin and MS Dinleyici},
year = {2023},
date = {2023-01-01},
journal = {Engineering Research Express},
volume = {5},
number = {1},
pages = {15028--15028},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ataç, E; Karatay, A; Dinleyici, MS Enhancing thickness determination of nanoscale dielectric films in phase diffraction-based optical characterization systems with radial basis function neural networks Journal Article Measurement Science and Technology, 34 (12), pp. 125201–125201, 2023. BibTeX @article{pop00001_32,
title = {Enhancing thickness determination of nanoscale dielectric films in phase diffraction-based optical characterization systems with radial basis function neural networks},
author = {E Ataç and A Karatay and MS Dinleyici},
year = {2023},
date = {2023-01-01},
journal = {Measurement Science and Technology},
volume = {34},
number = {12},
pages = {125201--125201},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ataç, E; Dinleyici, MS Subwavelength thickness characterization of curved dielectric films exploiting spatially structured entangled photons Journal Article JOSA B, 40 (8), pp. 2036–2042, 2023. BibTeX @article{pop00002v,
title = {Subwavelength thickness characterization of curved dielectric films exploiting spatially structured entangled photons},
author = {E Ataç and MS Dinleyici},
year = {2023},
date = {2023-01-01},
journal = {JOSA B},
volume = {40},
number = {8},
pages = {2036--2042},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ataç, E; Dinleyici, MS Sensitivity Improvement in Optical Phase Diffraction Using Empirical Mode Decomposition Journal Article 2023 31st Signal Processing and Communications Applications Conference (SIU …, 2023. BibTeX @article{pop00003_26,
title = {Sensitivity Improvement in Optical Phase Diffraction Using Empirical Mode Decomposition},
author = {E Ataç and MS Dinleyici},
year = {2023},
date = {2023-01-01},
journal = {2023 31st Signal Processing and Communications Applications Conference (SIU …},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ataç, E; Dinleyici, MS Görgül kip ayrıştırması kullanılarak optik faz kırınımında hassasiyet iyileştirilmesi Journal Article 2023 31st Signal Processing and Communications Applications Conference, Siu, 2023. BibTeX @article{pop00005q,
title = {Görgül kip ayrıştırması kullanılarak optik faz kırınımında hassasiyet iyileştirilmesi},
author = {E Ataç and MS Dinleyici},
year = {2023},
date = {2023-01-01},
journal = {2023 31st Signal Processing and Communications Applications Conference, Siu},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ekici, Ç; Dinleyici, MS Graded-index optical fiber transverse-spatial-mode entanglement Journal Article Physical Review A, 102 (1), pp. 13702–13702, 2020. BibTeX @article{pop00001p,
title = {Graded-index optical fiber transverse-spatial-mode entanglement},
author = {Ç Ekici and MS Dinleyici},
year = {2020},
date = {2020-01-01},
journal = {Physical Review A},
volume = {102},
number = {1},
pages = {13702--13702},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ataç, E; Dinleyici, MS Nanoscale curved dielectric film characterization beyond diffraction limits using spatially structured illumination Journal Article Optical Fiber Technology, 58 , pp. 102267–102267, 2020. BibTeX @article{pop00002k,
title = {Nanoscale curved dielectric film characterization beyond diffraction limits using spatially structured illumination},
author = {E Ataç and MS Dinleyici},
year = {2020},
date = {2020-01-01},
journal = {Optical Fiber Technology},
volume = {58},
pages = {102267--102267},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Sümer, Can; Kustepeli, Alp; Dinleyici, Mehmet Salih Investigating the experimental limits of the Brewster's angle method Journal Article Turkish Journal of Electrical Engineering and Computer Sciences, 2018, ISSN: 13036203. Links | BibTeX @article{Sumer2018,
title = {Investigating the experimental limits of the Brewster's angle method},
author = {Can Sümer and Alp Kustepeli and Mehmet Salih Dinleyici},
doi = {10.3906/elk-1707-210},
issn = {13036203},
year = {2018},
date = {2018-01-01},
journal = {Turkish Journal of Electrical Engineering and Computer Sciences},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ekici, Cağın; Dinleyici, Mehmet Salih A practical approach for optical characterization of a film coated on the optical fiber Journal Article Optical Fiber Technology, 2017, ISSN: 10685200. Abstract | Links | BibTeX @article{Ekici2017,
title = {A practical approach for optical characterization of a film coated on the optical fiber},
author = {Cağın Ekici and Mehmet Salih Dinleyici},
doi = {10.1016/j.yofte.2017.05.015},
issn = {10685200},
year = {2017},
date = {2017-01-01},
journal = {Optical Fiber Technology},
abstract = {Phase Diffraction (PD) Phase Diffraction.1 which is a result of the interaction of light waves with a transparent object, is exploited to characterize precisely optical properties of dielectric films coated on the optical fiber without harming any feature of the sample. Typical fiber sensor applications require films coated on the side surface of the optical fiber and optical properties of that curved films are crucial for design purposes. In this study, three Polyvinyl Alcohol (PVA) films are prepared, their thicknesses are estimated based on the phase diffraction method by fitting experimental results with a mathematical model within 2.3% error. The outcomes of this practical method show good agreement with findings of the destructive Scanning Electron Microscopy (SEM) measurements. The method has the potential to allow real time monitoring abrupt changes of surrounding medium's properties and to examine coating quality (i.e. thickness uniformity) of the film.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Phase Diffraction (PD) Phase Diffraction.1 which is a result of the interaction of light waves with a transparent object, is exploited to characterize precisely optical properties of dielectric films coated on the optical fiber without harming any feature of the sample. Typical fiber sensor applications require films coated on the side surface of the optical fiber and optical properties of that curved films are crucial for design purposes. In this study, three Polyvinyl Alcohol (PVA) films are prepared, their thicknesses are estimated based on the phase diffraction method by fitting experimental results with a mathematical model within 2.3% error. The outcomes of this practical method show good agreement with findings of the destructive Scanning Electron Microscopy (SEM) measurements. The method has the potential to allow real time monitoring abrupt changes of surrounding medium's properties and to examine coating quality (i.e. thickness uniformity) of the film. |
Ekici, C; Dinleyici, MS Kırınım yöntemi kullanılarak zeytinyağındaki tağşişin belirlenmesi Journal Article IEEE, 2017. BibTeX @article{pop00018g,
title = {Kırınım yöntemi kullanılarak zeytinyağındaki tağşişin belirlenmesi},
author = {C Ekici and MS Dinleyici},
year = {2017},
date = {2017-01-01},
journal = {IEEE},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Ekici, C; Dinleyici, MS Detection of olive oil adulteration using diffraction method Journal Article 2016 National Conference on Electrical, Electronics and Biomedical …, 2016. BibTeX @article{pop00019h,
title = {Detection of olive oil adulteration using diffraction method},
author = {C Ekici and MS Dinleyici},
year = {2016},
date = {2016-01-01},
journal = {2016 National Conference on Electrical, Electronics and Biomedical …},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Karakilinc, OO; Dinleyici, MS Design of dual‐mode dual‐band photonic crystal bandpass filters for terahertz communication applications Journal Article Microwave and Optical Technology Letters, 57 (8), pp. 1806–1810, 2015. BibTeX @article{pop00008e,
title = {Design of dual‐mode dual‐band photonic crystal bandpass filters for terahertz communication applications},
author = {OO Karakilinc and MS Dinleyici},
year = {2015},
date = {2015-01-01},
journal = {Microwave and Optical Technology Letters},
volume = {57},
number = {8},
pages = {1806--1810},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, MS Research Highlights: Elektrik-Elektronik Mühendisliği Bölümü Özel Sayısı Journal Article İzmir Yüksek Teknoloji Enstitüsü, 2015. BibTeX @article{pop00021f,
title = {Research Highlights: Elektrik-Elektronik Mühendisliği Bölümü Özel Sayısı},
author = {MS Dinleyici},
year = {2015},
date = {2015-01-01},
journal = {İzmir Yüksek Teknoloji Enstitüsü},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Akin, O; Dinleyici, MS Demonstration of pulse controlled all-optical switch/modulator Journal Article Optics letters, 39 (6), pp. 1469–1472, 2014. BibTeX @article{pop00007d,
title = {Demonstration of pulse controlled all-optical switch/modulator},
author = {O Akin and MS Dinleyici},
year = {2014},
date = {2014-01-01},
journal = {Optics letters},
volume = {39},
number = {6},
pages = {1469--1472},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Sümer, Can; Dinleyici, Salih M A fiber-integrated optical component fabricated via photopolymerization: Mode-selective grating coupler Journal Article Optics Communications, 2013, ISSN: 00304018. Abstract | Links | BibTeX @article{Sumer2013,
title = {A fiber-integrated optical component fabricated via photopolymerization: Mode-selective grating coupler},
author = {Can Sümer and Salih M Dinleyici},
doi = {10.1016/j.optcom.2013.06.028},
issn = {00304018},
year = {2013},
date = {2013-01-01},
journal = {Optics Communications},
abstract = {We demonstrate a mode-selective directional coupler based on a grating structure, which is fabricated by laser direct-writing on a photopolymer thin film. The device is implemented on the flat planar surface of the D-Fiber, enabling fiber integration, where an Acrylamide/Polyvinyl Alcohol based photopolymer material is used in the fabrication of the device. While the refractive index modulation properties of the polymer material are well known, surface relief and corrugation properties due to photopolymerization are investigated in this study. Theoretical model of the device is presented together with the optimization and simulation results of the final device; experimental results have been found to be in good agreement with simulations. textcopyright 2013 Elsevier B.V.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
We demonstrate a mode-selective directional coupler based on a grating structure, which is fabricated by laser direct-writing on a photopolymer thin film. The device is implemented on the flat planar surface of the D-Fiber, enabling fiber integration, where an Acrylamide/Polyvinyl Alcohol based photopolymer material is used in the fabrication of the device. While the refractive index modulation properties of the polymer material are well known, surface relief and corrugation properties due to photopolymerization are investigated in this study. Theoretical model of the device is presented together with the optimization and simulation results of the final device; experimental results have been found to be in good agreement with simulations. textcopyright 2013 Elsevier B.V. |
Dinleyici, Mehmet Salih; Sümer, Can Characterization and estimation of refractive index profile of laser-written photopolymer optical waveguides Journal Article Optics Communications, 2011, ISSN: 00304018. Abstract | Links | BibTeX @article{Dinleyici2011,
title = {Characterization and estimation of refractive index profile of laser-written photopolymer optical waveguides},
author = {Mehmet Salih Dinleyici and Can Sümer},
doi = {10.1016/j.optcom.2011.07.038},
issn = {00304018},
year = {2011},
date = {2011-01-01},
journal = {Optics Communications},
abstract = {In this study, channel waveguides fabricated in photopolymer films by direct-writing using a low-power CW laser, are used as phase objects in a simple plane-wave diffraction setup, and the refractive index modulation profiles of the waveguides are characterized using the recorded diffraction patterns. Index profiles are modeled by piece-wisely combining two Gaussian functions representing the central and the tail regions. Measured diffraction patterns are matched with patterns generated using the model. This simple model makes it possible to design various channel waveguides embedded into polymer substrates. The proposed model is tested on three distinctive waveguide profiles written on the same Acrylamide/Polyvinyl Alcohol based photopolymer with different exposures. textcopyright 2011 Elsevier B.V. All rights reserved.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
In this study, channel waveguides fabricated in photopolymer films by direct-writing using a low-power CW laser, are used as phase objects in a simple plane-wave diffraction setup, and the refractive index modulation profiles of the waveguides are characterized using the recorded diffraction patterns. Index profiles are modeled by piece-wisely combining two Gaussian functions representing the central and the tail regions. Measured diffraction patterns are matched with patterns generated using the model. This simple model makes it possible to design various channel waveguides embedded into polymer substrates. The proposed model is tested on three distinctive waveguide profiles written on the same Acrylamide/Polyvinyl Alcohol based photopolymer with different exposures. textcopyright 2011 Elsevier B.V. All rights reserved. |
Karakilinc, OO; Dinleyici, MS Interference grating structures in photonic crystal circuits Journal Article Optical and quantum electronics 42 (9-10), 645 , 2011. BibTeX @article{pop00023e,
title = {Interference grating structures in photonic crystal circuits},
author = {OO Karakilinc and MS Dinleyici},
year = {2011},
date = {2011-01-01},
journal = {Optical and quantum electronics 42 (9-10)},
volume = {645},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Akin, Osman; Dinleyici, Mehmet Salih An all-optical switching based on resonance breaking with a transient grating Journal Article Journal of Lightwave Technology, 2010, ISSN: 07338724. Abstract | Links | BibTeX @article{Akin2010,
title = {An all-optical switching based on resonance breaking with a transient grating},
author = {Osman Akin and Mehmet Salih Dinleyici},
doi = {10.1109/JLT.2010.2089599},
issn = {07338724},
year = {2010},
date = {2010-01-01},
journal = {Journal of Lightwave Technology},
abstract = {A new resonance breaking in-fiber switch as an all-optical network component is investigated and presented. A transient grating is applied to break the transverse resonance of the fundamental waveguide mode and the power coupled into the higher order propagating mode is computed using coupled mode theory (CMT). The coupling of the modes with the grating forming beams in the evanescent region of the waveguide is investigated with four wave mixing (FWM). High conversion efficiency is calculated in the case of perfect phase matching at communication wavelength 1550 nm. The conversion efficiency of the proposed structure is considered in terms of third-order nonlinear susceptibility, and the effect of design and tuning parameters are investigated for grating forming geometry and laser beam intensity, respectively.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
A new resonance breaking in-fiber switch as an all-optical network component is investigated and presented. A transient grating is applied to break the transverse resonance of the fundamental waveguide mode and the power coupled into the higher order propagating mode is computed using coupled mode theory (CMT). The coupling of the modes with the grating forming beams in the evanescent region of the waveguide is investigated with four wave mixing (FWM). High conversion efficiency is calculated in the case of perfect phase matching at communication wavelength 1550 nm. The conversion efficiency of the proposed structure is considered in terms of third-order nonlinear susceptibility, and the effect of design and tuning parameters are investigated for grating forming geometry and laser beam intensity, respectively. |
Karakilinc, OO; Dinleyici, MS A study on nonlinear photonic crystal optical switching with χ(3)type material Journal Article 2009 IEEE 17th Signal Processing and Communications Applications Conference …, 2009. BibTeX @article{pop00027d,
title = {A study on nonlinear photonic crystal optical switching with χ(3)type material},
author = {OO Karakilinc and MS Dinleyici},
year = {2009},
date = {2009-01-01},
journal = {2009 IEEE 17th Signal Processing and Communications Applications Conference …},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, MS; Akin, O Moiré effect analysis in LCD Backlight Modules Journal Article 2007 IEEE 15th Signal Processing and Communications Applications, pp. 1–4, 2007. BibTeX @article{pop00011e,
title = {Moiré effect analysis in LCD Backlight Modules},
author = {MS Dinleyici and O Akin},
year = {2007},
date = {2007-01-01},
journal = {2007 IEEE 15th Signal Processing and Communications Applications},
pages = {1--4},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Mocan, Bora; Dinleyici, Mehmet Salih A novel all-optical routing architecture for optical packet switched networks Journal Article Photonic Network Communications, 2006, ISSN: 1387974X. Links | BibTeX @article{Mocan2006,
title = {A novel all-optical routing architecture for optical packet switched networks},
author = {Bora Mocan and Mehmet Salih Dinleyici},
doi = {10.1007/s11107-006-5325-z},
issn = {1387974X},
year = {2006},
date = {2006-01-01},
journal = {Photonic Network Communications},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, MS; Akin, O 3-D switching fabric node design Journal Article IASTED Communications Systems and Networks, Spain, 2004. BibTeX @article{pop00013e,
title = {3-D switching fabric node design},
author = {MS Dinleyici and O Akin},
year = {2004},
date = {2004-01-01},
journal = {IASTED Communications Systems and Networks, Spain},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, Salih M An experimental work on optical component based on D-fiber/slab evanescent coupling structure Journal Article Optical and Quantum Electronics, 2003, ISSN: 03068919. Abstract | Links | BibTeX @article{Dinleyici2003,
title = {An experimental work on optical component based on D-fiber/slab evanescent coupling structure},
author = {Salih M Dinleyici},
doi = {10.1023/A:1021856108817},
issn = {03068919},
year = {2003},
date = {2003-01-01},
journal = {Optical and Quantum Electronics},
abstract = {Fiber/slab coupler structure has been exploited as a passive in-line optical fiber component for functions of filtering, intensity modulating and switching by many researchers. In this work a device based on the elliptic core D-fiber and polymer slab waveguide is proposed and its fabrication is experimentally investigated. The device is constructed by placing the polymer slab on the top of the flat side of the D-fiber, and then they are tested for transmission characteristics and polarization preserving properties for various configurations. The geometrical uniformity of the device is examined under Scanning Electron Microscope for the purpose of device performance evaluation. Potential usage of this device as an all-optical switch is also discussed at the end.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Fiber/slab coupler structure has been exploited as a passive in-line optical fiber component for functions of filtering, intensity modulating and switching by many researchers. In this work a device based on the elliptic core D-fiber and polymer slab waveguide is proposed and its fabrication is experimentally investigated. The device is constructed by placing the polymer slab on the top of the flat side of the D-fiber, and then they are tested for transmission characteristics and polarization preserving properties for various configurations. The geometrical uniformity of the device is examined under Scanning Electron Microscope for the purpose of device performance evaluation. Potential usage of this device as an all-optical switch is also discussed at the end. |
Dinleyici, MS All-optical switching based on grating written photorefractive slab/fiber waveguide coupler Journal Article Proceedings of LFNM 2002. 4th International Workshop on Laser and Fiber …, 2002. BibTeX @article{pop00028d,
title = {All-optical switching based on grating written photorefractive slab/fiber waveguide coupler},
author = {MS Dinleyici},
year = {2002},
date = {2002-01-01},
journal = {Proceedings of LFNM 2002. 4th International Workshop on Laser and Fiber …},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, MS Device Length Requirement in Slab Fiber Evanescent Coupler Journal Article Fiber & Integrated Optics, 19 (1), pp. 87–95, 2000. BibTeX @article{pop00015f,
title = {Device Length Requirement in Slab Fiber Evanescent Coupler},
author = {MS Dinleyici},
year = {2000},
date = {2000-01-01},
journal = {Fiber & Integrated Optics},
volume = {19},
number = {1},
pages = {87--95},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, MS; Patterson, DB Calculation of the wavelength filter properties of the fiber-slab waveguide structure using vector mode expansion Journal Article Journal of lightwave technology, 16 (11), pp. 2034–2039, 1998. BibTeX @article{pop00003eb,
title = {Calculation of the wavelength filter properties of the fiber-slab waveguide structure using vector mode expansion},
author = {MS Dinleyici and DB Patterson},
year = {1998},
date = {1998-01-01},
journal = {Journal of lightwave technology},
volume = {16},
number = {11},
pages = {2034--2039},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Di̇nleyi̇ci̇, MS Vector mode expansion model for slab/fiber waveguide structure Journal Article Illinois Institute of Technology, 1998. BibTeX @article{pop00030g,
title = {Vector mode expansion model for slab/fiber waveguide structure},
author = {MS Di̇nleyi̇ci̇},
year = {1998},
date = {1998-01-01},
journal = {Illinois Institute of Technology},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Dinleyici, MS; Patterson, DB Vector modal solution of evanescent coupler Journal Article Journal of lightwave technology, 15 (12), pp. 2316–2324, 1997. BibTeX @article{pop00001eb,
title = {Vector modal solution of evanescent coupler},
author = {MS Dinleyici and DB Patterson},
year = {1997},
date = {1997-01-01},
journal = {Journal of lightwave technology},
volume = {15},
number = {12},
pages = {2316--2324},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
Books
|
Karakılınç, ÖÖ; Dinleyici, MS Interference grating structures in photonic crystal circuits Book Springer, 2011. BibTeX @book{pop00024e,
title = {Interference grating structures in photonic crystal circuits},
author = {ÖÖ Karakılınç and MS Dinleyici},
year = {2011},
date = {2011-01-01},
publisher = {Springer},
keywords = {},
pubstate = {published},
tppubtype = {book}
}
|
Inproceedings
|
Karakilinc, Ozgur Onder; Dinleyici, Mehmet Salih Index modulation of transient grating in nonlinear medium Inproceedings Nonlinear Optics and its Applications IV, 2016. Abstract | Links | BibTeX @inproceedings{Karakilinc2016,
title = {Index modulation of transient grating in nonlinear medium},
author = {Ozgur Onder Karakilinc and Mehmet Salih Dinleyici},
doi = {10.1117/12.2227495},
year = {2016},
date = {2016-01-01},
booktitle = {Nonlinear Optics and its Applications IV},
abstract = {textcopyright 2016 SPIE. A transient chirped grating structure is formed by beam interferences in nonlinear photonic crystal waveguide. Pulse propagation in nonlinear transient grating media is investigated and its impact on the transmission dynamics is explored. The grating may not be stationary propagating but anharmonically oscillating. Thus, effective modification of the refractive index needs to be evaluated in detail.},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
textcopyright 2016 SPIE. A transient chirped grating structure is formed by beam interferences in nonlinear photonic crystal waveguide. Pulse propagation in nonlinear transient grating media is investigated and its impact on the transmission dynamics is explored. The grating may not be stationary propagating but anharmonically oscillating. Thus, effective modification of the refractive index needs to be evaluated in detail. |
Akin, Osman; Dinleyici, Salih M In fiber resonance breaking mechanism Inproceedings 2010 10th Mediterranean Microwave Symposium, MMS 2010, 2010, ISBN: 9781424472437. Abstract | Links | BibTeX @inproceedings{Akin2010a,
title = {In fiber resonance breaking mechanism},
author = {Osman Akin and Salih M Dinleyici},
doi = {10.1109/MMW.2010.5605182},
isbn = {9781424472437},
year = {2010},
date = {2010-01-01},
booktitle = {2010 10th Mediterranean Microwave Symposium, MMS 2010},
abstract = {In this work we investigate mode resonance breaking mechanism in slab waveguide accomplished by cladding index modulation according to Kerr nonlinearity. The interaction is considered to be a Four Wave Mixing Process and Coupled Mode Theory is used to analyze the effect of cladding perturbation into propagating fundamental mode.},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
In this work we investigate mode resonance breaking mechanism in slab waveguide accomplished by cladding index modulation according to Kerr nonlinearity. The interaction is considered to be a Four Wave Mixing Process and Coupled Mode Theory is used to analyze the effect of cladding perturbation into propagating fundamental mode. |
Akin, Osman; Dinleyici, Salih M In fiber resonance breaking mechanism Inproceedings 2010 10th Mediterranean Microwave Symposium, MMS 2010, 2010, ISBN: 9781424472437. Abstract | Links | BibTeX @inproceedings{Akin2010ab,
title = {In fiber resonance breaking mechanism},
author = {Osman Akin and Salih M Dinleyici},
doi = {10.1109/MMW.2010.5605182},
isbn = {9781424472437},
year = {2010},
date = {2010-01-01},
booktitle = {2010 10th Mediterranean Microwave Symposium, MMS 2010},
abstract = {In this work we investigate mode resonance breaking mechanism in slab waveguide accomplished by cladding index modulation according to Kerr nonlinearity. The interaction is considered to be a Four Wave Mixing Process and Coupled Mode Theory is used to analyze the effect of cladding perturbation into propagating fundamental mode.},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
In this work we investigate mode resonance breaking mechanism in slab waveguide accomplished by cladding index modulation according to Kerr nonlinearity. The interaction is considered to be a Four Wave Mixing Process and Coupled Mode Theory is used to analyze the effect of cladding perturbation into propagating fundamental mode. |
Karatay, O; Dinleyici, Salih M Low-cost free-space optical communication system design Inproceedings 2004. Links | BibTeX @inproceedings{Karatay2004,
title = {Low-cost free-space optical communication system design},
author = {O Karatay and Salih M Dinleyici},
doi = {10.1109/siu.2004.1338627},
year = {2004},
date = {2004-01-01},
keywords = {},
pubstate = {published},
tppubtype = {inproceedings}
}
|
